3 Licensed Mold Companies in Irving
Source: Texas Department of Licensing and Regulation (TDLR) · See the full directory below
Licensed Water Damage Contractors in Irving, Texas
Verify your water damage or mold contractor's license in Irving, Texas. Direct link to TDLR License Search, what licenses to check, red flags, and how to confirm IICRC certification.
Quick Answer — How many licensed mold companies are in Irving?
As of August 2026, 3 companies hold an active TDLR mold license registered in Irving: 2 mold remediation companies, 1 assessment company, and 0 analysis laboratories. Across Dallas County, another 640 individuals hold personal mold licenses. That works out to roughly one licensed mold company per 80,124 residents. Typical professional water damage restoration in Irving runs $2,400–$13,500 depending on severity.
How to Verify a Texas Mold Contractor License
Go to tdlr.texas.gov/LicenseSearch
Search by contractor company name or individual's name
Confirm license type is 'Mold Remediation Contractor' or 'Mold Assessment Consultant'
Verify status shows 'Active' with a future expiration date
Check for any disciplinary actions in the same record
Cross-check IICRC certification at iicrc.org/find-an-iicrc-certified-firm
Texas Mold License Types (Texas Department of Licensing and Regulation)
Mold Assessment Consultant (MAC)
Licensed by Texas Department of Licensing and Regulation
Mold Remediation Contractor (MRC)
Licensed by Texas Department of Licensing and Regulation
Mold Assessment Technician (MAT)
Licensed by Texas Department of Licensing and Regulation
Mold Remediation Worker (MRW)
Licensed by Texas Department of Licensing and Regulation
Texas has no separate water damage restoration license — only mold work requires a TDLR license. Structural reconstruction requires a general contractor registered with the Texas Secretary of State.
IICRC WRT (Water Restoration Technician) and ASD (Applied Structural Drying) certifications are the industry standard for extraction and drying. Not required by Texas law but recognized by all major TX insurers as proof of competency.
Key Facts — Texas Contractor Licensing
- Mold work requires a TDLR license — a general contractor license alone is not sufficient
- Texas does not require a separate state license for water damage extraction and drying — only the mold remediation phase is licensed
- TDLR mold contractors must carry at least $300,000 general liability insurance per occurrence
- The same company cannot hold both a Mold Assessment and Mold Remediation license in TX — these must be separate firms
Mold Licensing in Irving — By the Numbers
3
Active licensed companies
in Irving
640
Licensed professionals
Dallas County
1
Licenses expiring
within 12 months
1:80,124
Company-to-resident ratio
pop. 240,373
TDLR-Licensed Mold Companies in Irving
3 companies hold an active mold license registered in Irving, per public Texas Department of Licensing and Regulation records (updated August 2026). Always confirm current status at the official portal before hiring.
2
Remediation Companies
1
Assessment Companies
0
Analysis Laboratories
Remediation Companies
2Licensed to remove and remediate mold — the companies you hire after water damage.
Mold Force LLC
License RCO1482 · Expires Oct 10, 2027
3701 W ROYAL LN STE 120, Irving 75063
972-399-0001
Power Dry Chicago, INC
License RCO1656 · Expires Sep 15, 2026
8105 N BELTLINE RD STE 130, Irving 75063
972-753-0000
Assessment Companies
1Licensed to inspect, test, and write remediation protocols — hire separately from your remediation company to avoid conflicts of interest.
Asbestos & Mold Professionals Of Texas LLC
License ACO1220 · Expires Jan 14, 2027
1433 GLENBROOK DR, Irving 75061
469-271-3705
Beyond companies: 50 licensed remediation contractors, 81 assessment consultants, 14 assessment technicians, 495 remediation workers hold individual TDLR licenses across Dallas County. Individual license holders typically work for the companies listed above — ask any technician for their personal license number and verify it too.
Directory compiled from public Texas Department of Licensing and Regulation license records. HearthDry is not affiliated with and does not endorse the companies listed; license status may change — verify at the official portal.
How Irving Compares Across Texas
Active TDLR-licensed mold companies registered in Texas's largest markets. A higher company count generally means faster availability and more competitive bids after a water event.
| City | Licensed Companies | County | Population | Residents per Company |
|---|---|---|---|---|
| Houston | 91 | Harris | 2,304,580 | 25,325 |
| San Antonio | 42 | Bexar | 1,434,625 | 34,158 |
| Austin | 32 | Travis | 978,908 | 30,591 |
| Dallas | 25 | Dallas | 1,304,379 | 52,175 |
| Plano | 16 | Collin | 285,494 | 17,843 |
| Fort Worth | 15 | Tarrant | 918,915 | 61,261 |
| Carrollton | 13 | Dallas | 133,434 | 10,264 |
| El Paso | 11 | El Paso | 678,815 | 61,710 |
| Irving ← this page | 3 | Dallas | 240,373 | 80,124 |
Licensed Mold Companies Near Irving
After major storms, Irving companies book up fast. These nearby cities also have active licensed mold companies — most serve the whole metro area:
Red Flags — Unlicensed Contractor Warning Signs
- No written estimate or contract before work begins
- Cannot provide a license number when asked
- Asks you to sign an AOB (Assignment of Benefits) form immediately
- Demands full cash payment upfront
- No proof of general liability or workers' compensation insurance
- Arrived unsolicited immediately after a storm (storm chaser)
Talk to a water damage pro now
Answered 24/7 · Free call · Your ZIP routes you to the nearest crew
(888) 840-6512- Describe the damage & give your ZIP
- You're routed to the on-call local crew
- They quote — you decide, no obligation
License Verification — Irving, Texas FAQ
Do water damage contractors need a license in Irving, Texas?
Water damage extraction and drying itself does not require a separate state license in Texas. The mold remediation phase does: Texas Department of Licensing and Regulation (TDLR) issues it, and doing mold work without it is a violation the state can act on.
Verify the Texas Department of Licensing and Regulation license before work begins, and ask separately for IICRC certification — WRT for drying, AMRT for mold — which is the credential that speaks to the work rather than the paperwork.
How do I verify a mold contractor's license in Irving, Texas?
Go to www.tdlr.texas.gov/LicenseSearch/ and search by the contractor's company or individual name. Confirm the license type is Mold Assessment Consultant (MAC) or Mold Remediation Contractor (MRC) and status is Active with a future expiration date.
Also verify their IICRC certification at iicrc.org/find-an-iicrc-certified-firm. When searching TDLR, use the company's full legal name — not their DBA (doing business as) name. If in doubt, ask the contractor for their TDLR license number directly.
What is the penalty for hiring an unlicensed contractor in Irving, Texas?
Performing mold remediation or mold assessment without a TDLR license is a Class A misdemeanor in Texas — up to $25,000 fine per violation under TX Occupations Code §1958.
Beyond the legal risk to the contractor, you face real consequences too: your homeowners insurance may deny the claim if unlicensed work is discovered, your state warranty protections may be void, and improper remediation can leave mold behind — costing more to fix correctly the second time.
What should licensed water damage restoration cost in Texas?
Licensed restoration contractors in Texas use Xactimate pricing — the same software insurance adjusters use. Typical statewide ranges: residential single-room events $1,500–$4,000; basement flooding $3,500–$10,000; sewage backup $5,000–$18,000.
Category 3 events (sewage or floodwater) cost more due to full decontamination requirements. Always get 2–3 written estimates — the lowest bid from an unlicensed contractor is never the right choice.
What is IICRC certification and is it required in Irving, Texas?
IICRC (Institute of Inspection, Cleaning and Restoration Certification) is the national professional certification for restoration technicians — a technical credential, not a government licence, and the two are separate things to check. WRT (Water Restoration Technician) is the one that matters for water damage; S520/AMRT covers mold.
Ask the company for its certification number and check it yourself at iicrc.org/find-an-iicrc-certified-firm, because a certificate can lapse between a company earning it and turning up at your house. Whether Texas also requires a state licence is covered above.
Who do I call right now for water damage?
Call (888) 840-6512. The line is answered 24 hours a day, seven days a week, and connects you with an IICRC-certified water damage restoration company that serves your area.
Describe what you can see — where the water is coming from, how long it has been there, and whether it smells — and the dispatcher routes you to a crew that handles that kind of loss. If the source is a pipe or an appliance, shut the main water valve first; the call itself takes under two minutes.