No freeze warning for Bend right now
Freeze Warning in Bend, OR? Protect Your Pipes Tonight
When a freeze reaches Bend, the pipes most at risk run through exterior walls, crawl spaces, attics and garages. Let those faucets drip, open the cabinet doors under sinks on outside walls, keep the heat at 55°F or higher and find your main shut-off now. If a pipe has already burst, shut the main and call (888) 840-6512: the line is answered 24/7 and reaches an IICRC-certified restoration company covering your ZIP, which gives you an arrival window for your address on the call. Most water damage jobs in Bend run $1,500–$8,500.
Press 1 for water damage or 2 for mold, then your 5-digit ZIP. The line goes quiet for about half a minute while it connects — that is normal, stay on. If it does not connect, call once more: companies taking calls change minute to minute.
Live status checked Nov 3, 10:09 PM ET · Source: National Weather Service, forecast zone ORZ511
Bend freeze status
No freeze, hard freeze or extreme cold alert covers Bend at the moment. The first hard freezes usually reach the northern states in late October and the South between December and February. This page updates on its own when the Weather Service issues one, and the official Bend forecast shows the overnight lows.
How often Bend gets cold enough to freeze pipes
In NOAA’s 1991–2020 normals for the nearest weather station, Bend averages 181.2 nights a year at or below 32°F and 50.1 at or below 20°F, the temperature at which pipes in unheated spaces start to freeze. The median first 20°F night is Oct 26, so finish winterizing before then. Compare Bend with 500 other U.S. cities.
Bend's weather and your pipes
Bend, Oregon's Pacific Northwest climate delivers the most persistent annual precipitation of any U.S. West Coast state — Portland averages 36 inches annually, concentrated in an October–April wet season that produces 150+ consecutive days with measurable rainfall. This sustained moisture creates chronic roof leak risk in aging materials, persistent crawl space moisture, and mold growth in any area of inadequate ventilation. Oregon's rivers (Willamette, Rogue, Columbia) create major Zone AE flood designations. Eastern Oregon's high desert experiences pipe freeze events and summer flash flooding. Oregon Insurance Division handles claim disputes — contact OID for insurer non-compliance.
Before, during and after a freeze in Bend
1. Before it gets cold
Disconnect garden hoses, shut and drain outdoor spigots if you have an inside valve, and walk to your main shut-off so you can find it in the dark.
2. The night of the freeze
Let faucets on exterior walls drip, open the cabinet doors under those sinks, keep the thermostat at 55°F or higher even if you are away, and keep the garage door closed.
3. If a pipe freezes
Leave the faucet open and warm the pipe from the faucet end with a hair dryer or heating pad, never an open flame. If water does not return, look for a split before it thaws.
4. If a pipe bursts
Close the main shut-off, switch off power to wet rooms at the breaker, photograph everything, then get the water out and the structure dried before mold starts in 24 to 48 hours.
More for Bend
Deschutes County, Oregon
Bend freeze questions
Is there a freeze warning in Bend tonight?
Not as of Nov 3, 10:09 PM ET. This page reads the National Weather Service feed for Bend's forecast zone every 30 minutes and changes the moment a freeze, hard freeze or extreme cold alert is issued.
At what temperature do pipes freeze in Bend?
Uninsulated pipes in unheated spaces are at risk once the air around them stays at or below about 20°F for several hours. In Bend, as anywhere, the pipes that freeze first run through exterior walls, crawl spaces, attics and garages. A pipe usually splits while frozen and floods when it thaws.
What should I do if a pipe bursts in Bend?
Shut off the main water valve, open the lowest faucet to drain the lines, turn off power to any wet room at the breaker panel, and photograph the damage. Then get the water out and the walls and floor dried with moisture meters: drywall, insulation and framing left wet for 24 to 48 hours are where mold starts.
Who do I call right now for water damage?
Call (888) 840-6512. The line is answered 24 hours a day, seven days a week, and connects you with an IICRC-certified water damage restoration company that serves your area. A recorded menu picks up first: choose water damage or mold, key in your 5-digit ZIP code, and hold through the short silence while the call is passed to the company.
Describe what you can see — where the water is coming from, how long it has been there, and whether it smells — the more specific you are, the faster the right company is on the line. If the source is a pipe or an appliance, shut the main water valve first. Have four things ready and the call goes quickly: the address, when the water started, what is wet now, and whether you have filed an insurance claim.
Still not sure which of these is your situation? (888) 840-6512 · toll-free · answered 24/7