Skip to main content

Albuquerque · Bernalillo County · NM

Emergency Water Damage Restoration in Albuquerque, NM

Water in the house in Albuquerque? Call (888) 840-6512. The line is answered 24/7, and an IICRC-certified restoration company covering your ZIP gives you an arrival window for your address on the call. Most Albuquerque jobs run $1,350–$7,650 and dry in 3–5 days. Mold starts on wet material in 24–48 hours, so what happens today decides whether it stays a drying job.

  • Answered 24/7
  • IICRC standards
  • No charge for the referral
Albuquerque, NM© OpenStreetMap contributors

Answered 24/7

Talk to a company that covers Albuquerque

Water Damage Restoration

Call (888) 840-6512

Toll-free · no obligation · no charge for the referral

  1. 1Press 1 for water damage, 2 for mold
  2. 2Enter your 5-digit ZIP, then stay on through about 30 quiet seconds
  3. 3A company covering your address picks up and gives you an arrival window

Have ready

  • • Address and ZIP
  • • When it started
  • • What is wet now
  • • Claim opened yet?

Covers Albuquerque & Bernalillo County · 87102 · 87103 · 87104

60-Second Emergency Checklist — Albuquerque

  1. Shut off the main water supply — know your shutoff location now

    ⚠ If water is near the electrical panel, cut power first

  2. Cut electricity to all wet areas at the breaker panel

    ⚠ Never touch outlets or appliances in standing water

  3. Photograph and video ALL damage before moving anything

    ⚠ This is critical for your insurance claim — don't skip

  4. Move documents, medications, and irreplaceable items to dry area

  5. Call a certified restoration company — not just a plumber

    ⚠ A plumber fixes the source; restoration extracts water and dries structure

  6. Call your insurance company to open a claim — get a claim number

    ⚠ Do NOT let any contractor start without a claim number

What happens next

What a certified company does in Albuquerque — and what each stage costs

Most Albuquerque jobs run $1,350–$7,650 in total. The ranges below are our estimate of how that splits by stage; how we calculate them.

  1. A technician in a hard hat and safety vest kneels to check the baseboard of an empty room1 · Day 1

    Water out, readings in

    Standing water is extracted and every wet surface is mapped with a moisture meter. That map is what the insurer and the drying plan are built on.

    $378–$1,224

  2. A technician extracting standing water from a floor with a wand2 · 3–5 days

    Structural drying

    Air movers and dehumidifiers dry the framing and subfloor, checked daily until the readings reach dry standard. Carpet can look dry long before the floor under it is.

    $594–$1,989

  3. A worker in a respirator, hard hat and overalls works on the walls of a stripped-out room3 · If needed

    Remove what cannot be dried

    Swollen drywall, soaked insulation and carpet pad come out. Anything touched by sewage is removed, not dried, and this is where mold is stopped before it starts.

    $297–$995

  4. A worker in gloves and a hard hat fits a new drywall panel4 · After drying

    Put back

    Drywall, flooring and paint go back only after the readings are logged. The rebuild is quoted from the moisture map, so ask for it in writing.

    Quoted from the moisture map

What sets the price

Where the water came from matters more than how much

Clean water from a supply line is dried in place. Water from a washing machine or dishwasher needs cleaning as well. Sewage is removed, not dried, which is why the same room can cost three times as much.

Water Category Cost Table — Albuquerque, NM

Extraction & drying cost per square foot by IICRC water category

Water Category$/sq ft
Category 1 — Clean

Burst supply line, clean appliance overflow

$2.46–$6.08
Category 2 — Gray

Dishwasher, washing machine, toilet bowl (no feces)

$6.08–$7.36
Category 3 — Black

Sewage backup, floodwater, toilet overflow with feces

$8.64–$10.89

Estimates exclude reconstruction (drywall, flooring replacement). National benchmarks: Cat 1 $3.75–$4.25, Cat 2 $4.10–$6.50, Cat 3 $7–$7.50/sq ft — adjusted for Albuquerque market (2.9–9.9/sq ft range).

Before work starts

Check the company before it starts

Extraction can start the day you call. These five checks take ten minutes and belong before anything is signed or rebuilt.

  1. 1

    IICRC certification

    Ask for the firm's certification and check it.

    iicrc.org
  2. 2

    State licence

    Where New Mexico requires one, ask for the number and look it up.

  3. 3

    Insurance certificate

    Liability and workers' comp, in writing, before anyone works in the house.

  4. 4

    Written scope

    Drying can start first; nothing is rebuilt without a written scope and price.

  5. 5

    Read before you sign

    An Assignment of Benefits hands your claim to the contractor. Read it, or do not sign it.

Local causes

Why water damage happens in Albuquerque

  • Monsoon flash flooding through Albuquerque's arroyo network — Tijeras Arroyo, Embudo Arroyo, and related channels channel intense runoff into residential areas from late June through September
  • Post-wildfire debris flows from Sandia and Jemez Mountain burn scars, most recently following the 2022 Hermit's Peak/Calf Canyon Fire — the largest in New Mexico history
  • Rio Grande bosque flooding during high-snowmelt years affecting South Valley and Barelas neighborhoods adjacent to the river corridor
  • Caliche hardpan soil throughout the Albuquerque metro preventing water absorption and directing monsoon runoff into homes, garages, and crawlspaces
  • Pipe freeze events in homes at higher elevations including Four Hills, Tijeras Canyon, and East Mountains during Albuquerque's -5°F to -15°F winter cold snaps

South Valley and Barelas, lying between the Rio Grande and Interstate 25, occupy portions of the active Rio Grande floodplain and face periodic river flooding during high-snowmelt years from the Colorado Rockies — significant portions of South Valley remain under-mapped in current FEMA flood zone data. Corrales, north of Albuquerque along the Rio Grande's west bank, is a low-lying agricultural and residential community where arroyo culverts routinely overflow during intense monsoon storms, inundating properties that rarely carry flood insurance.

Water damage questions from Albuquerque homeowners

How fast can a water damage company respond in Albuquerque?

Most certified restoration companies serving Albuquerque answer 24/7 and confirm a real arrival window for your address on the call — how long that is depends on where you are, what time it is, and how many jobs are already running.

Call early either way: every hour that water sits widens the damage, and mold starts on wet material within 24–48 hours.

How long does water damage restoration take in Albuquerque?

Drying usually takes 3–5 days with professional equipment, and it is finished when moisture readings reach dry standard, not on a date. Anything that has to be removed and rebuilt comes after that, which is why a job with drywall or flooring replacement runs longer than the drying alone.

How much does water damage restoration cost in Albuquerque?

Most Albuquerque jobs run $1,350–$7,650, about $2.9–$9.9 per square foot for extraction and drying. Contaminated water (a sewage backup) costs more because the wet material is removed rather than dried, and rebuilding is priced separately once the structure is dry.

How do I verify a restoration contractor in New Mexico?

Ask for three things before work starts: the IICRC certification (check it at iicrc.org), a certificate of liability insurance, and the New Mexico licence number where the work needs one (New Mexico Regulation and Licensing Department, Construction Industries Division).

Get a written scope before any rebuild, and do not sign an Assignment of Benefits you have not read.

Who do I call right now for water damage?

Call (888) 840-6512. The line is answered 24 hours a day, seven days a week, and connects you with an IICRC-certified water damage restoration company that serves your area. Describe what you can see — where the water is coming from, how long it has been there, and whether it smells — the more specific you are, the faster the right company is on the line.

If the source is a pipe or an appliance, shut the main water valve first. Have four things ready and the call goes quickly: the address, when the water started, what is wet now, and whether you have filed an insurance claim.

Still not sure which of these is your situation? (888) 840-6512 · toll-free · answered 24/7

Water in the house in Albuquerque right now?

One call reaches an IICRC-certified company covering your ZIP. Answered 24/7, no charge for the referral.