Slab Leak Cleanup Services Near You
Slab leak detection support, water damage cleanup, and structural drying
Water under the slab shows up as warm floors, damp carpet and a bill that won't drop — certified crews dry the structure while the leak is repaired.
Response
ASAP
24/7 dispatch
Cost
Depends
on your job
Duration
Varies
by the damage
Your three numbers take one call — no obligation.
Not sure who to call first? See the correct call order guide →
The service
What you get when you call for slab leak cleanup
- Coordination with leak detection and plumbing repair
- Moisture mapping of flooring, walls and cabinets above the leak
- Removal of saturated flooring and drying of the slab
- Antimicrobial treatment where moisture was long-standing
- Documentation of the leak and the damage
A dry floor over a repaired line — and the hidden damage found before it grows.
Call now if
- A warm spot on the floor, or a water bill that jumped
- Carpet or flooring damp with no visible source
- Cracks or heaving in the slab
Answered 24/7 · costs explained before any work · no obligation
Is this your situation?
Signs you need slab leak cleanup
- A warm spot on the floor
- A water bill that jumped with no change in use
- Damp carpet or flooring with no visible source
- The sound of running water with every tap closed
- Cracks or heaving in the slab
Recognise more than one? Call (888) 840-6512 and describe what you're seeing — the pro tells you what it is before anything is agreed.
How the work is done
Slab Leak Cleanup, step by step
Every crew in this network works to IICRC S500, the written industry standard — so the sequence is the same whoever arrives.
- 1
Locate
coordinate detection so the repair is targeted
- 2
Map
which floors and walls the moisture reached
- 3
Remove and dry
flooring up, slab and framing dried to standard
- 4
Treat
antimicrobial where the leak was slow
- 5
Document
the source, the readings, the claim package
Why this line
Three ways to handle slab leak cleanup — two cost more than they look
Calling companies yourself
- Dial down a list until someone answers
- Each one scopes and quotes differently
- Licence and insurance checks are on you
- Nights and weekends go to voicemail
Waiting to see
- Mold starts within 24–48 hours on wet material
- Hidden moisture keeps spreading
- Insurers question delayed mitigation
- A drying job becomes a rebuild
One call to this line
- Describe it once — routed to a pro covering your ZIP
- IICRC-certified, licensed and insured companies
- Costs explained before anything is agreed
- Answered 24/7 by a live person
Pros in this network carry
Insurance and paperwork
Many policies cover the resulting damage but not the pipe repair, and slab leaks are often argued as gradual. Documentation of when you discovered it matters — ask the pro on the call.
The complete claims guide →Answered right now
Two minutes on the phone beats an hour of reading.
Your arrival window, your scope, your ballpark — before anything is agreed.
Call (888) 840-6512Understanding the problem
About slab leak cleanup
A slab leak is a pressurized pipe leaking beneath your concrete foundation. The first signs are warm floor spots, unexplained water bills, or water seeping at baseboards. Certified crews locate the moisture footprint with thermal imaging, extract and dry affected flooring and walls, and coordinate with leak-detection plumbers so the pipe repair and the drying happen in the right order.
Quick answer
Slab leak cleanup handles water damage from a supply line failing beneath a concrete foundation — often discovered as warm floor spots, an unexplained water bill, or damp flooring. Typical cost is $2,000–$10,000 over about five days. The plumbing repair and the drying are separate jobs, and moisture trapped under flooring is what makes the restoration scope grow. Call (888) 840-6512 to reach a certified water damage restoration company in your area; the line is answered 24/7.
Common Causes of Slab Leak Cleanup
- Copper pipe corrosion under the slab
- Foundation settling stressing supply lines
- Abrasion where pipes rub concrete or rebar
- High water pressure fatiguing joints
- Poor original installation without sleeves
Your first moves before the crew arrives
- 1Do the meter test. Close every fixture and appliance valve, then watch the water meter. Movement over 15 minutes with everything off confirms a supply-side leak.
- 2Feel for warm floor spots. Walk barefoot over tile and concrete areas. A distinct warm patch usually marks a hot-water line leak directly below.
- 3Shut off the main if signs are active. If flooring is visibly wet or the meter spins fast, close the main shut-off until detection is scheduled. A pressurized leak flows continuously.
- 4Photograph everything with a timestamp. Wet baseboards, buckled boards, the water bill, the spinning meter — the record of when symptoms started supports the insurance claim.
- 5Book leak detection, not exploratory demolition. Electronic and thermal detection pinpoints the leak within inches. Breaking concrete on guesses multiplies both cost and repair time.
- 6Start drying as soon as the location is known. A certified crew can extract and begin drying flooring and walls while the plumbing repair is scheduled — waiting invites mold into wet materials.
What Slab Leak Cleanup Looks Like
Slab Leak Cleanup Questions
How do I know if I have a slab leak?
Classic signs: a water bill that jumped without explanation, the sound of running water when everything is off, warm spots on the floor (hot-line leaks), damp carpet edges, cracking tile, or a water meter that spins with all fixtures closed. Two or more of these together justify a professional leak detection visit.
Does homeowners insurance cover slab leaks?
Most policies cover the water damage a slab leak causes — flooring, drywall, drying — and the cost of tearing out and repairing the slab to access the pipe.
The pipe repair itself is usually excluded, and gradual long-term leaks can be contested. Early documentation of when signs appeared strengthens the claim considerably.
What does slab leak repair cost?
Detection runs $150–$500. The plumbing fix ranges from $500 spot repairs to $3,000–$6,000 for rerouting the line overhead. Water damage cleanup and drying adds $1,500–$5,000 depending on how much flooring and drywall the leak reached before discovery. Whole projects typically land between $2,000 and $10,000.
Repair, reroute, or repipe — which is right?
A single accessible leak in otherwise healthy pipe favors a spot repair. A leak in aging copper that has already failed elsewhere favors rerouting that line through walls or attic.
Multiple leaks across the system point to repiping. Get the water damage dried regardless — wet materials do not wait for plumbing decisions.
Can a slab leak damage the foundation itself?
Left running, yes. Constant water under a slab can erode supporting soil and cause differential settling, cracking, and door misalignment. That secondary damage costs far more than the leak repair. Treat persistent under-slab moisture as time-critical even when the visible symptoms seem minor.
Who do I call right now for water damage?
Call (888) 840-6512. The line is answered 24 hours a day, seven days a week, and connects you with an IICRC-certified water damage restoration company that serves your area.
Describe what you can see — where the water is coming from, how long it has been there, and whether it smells — and the dispatcher routes you to a crew that handles that kind of loss. If the source is a pipe or an appliance, shut the main water valve first; the call itself takes under two minutes.
HearthDry is an independent resource. We do not perform restoration work. We connect homeowners with licensed, IICRC-certified third-party contractors. Cost ranges are estimates only. Verify contractor licensing before hiring.